Tutorial
P-Video 2 Pro Avatar: 5 High-Value Use Cases and Implementation Notes
A developer guide to picking the right inputs, resolution tier, and audio path for avatar video generation
На этой странице
What P-Video 2 Pro Avatar Actually Does
Official per-second rates are $0.0286 (480P), $0.0572 (768P, the default), $0.0858 (1080P), $0.1143 (2K), and $0.1715 (4K).
P-Video 2 Pro Avatar is a video generation model from Pruna AI, available on HiAPI through a single unified route. It takes a portrait image and a speech signal — either a text script or a pre-recorded audio file — and returns a video of that person speaking. The output is a standard video asset you can drop into a product surface, a CMS, or a render pipeline.
The route exposes four capabilities that map to distinct product needs:
- image-to-video: animate a still portrait into motion, driven by whatever narration you supply.
- audio-to-video: pair a portrait with your own recorded speech and let the model match the performance to the audio.
- lip-sync: align mouth movement and facial behavior to a specific speech track for presenter-style delivery.
- avatar-video: the end-to-end avatar use case — a talking person generated from a portrait plus either TTS or uploaded audio.
These are not four separate models. They are four ways of describing the same underlying generation path, and the inputs you choose determine which one you are effectively using. That matters for implementation: before you touch resolution or prompt, decide whether the speech comes from the built-in text-to-speech engine or from your own audio file. Everything else follows from that decision.
The model also takes a prompt describing how the person looks, moves, and behaves while speaking, a resolution tier, and an optional seed. Only one parameter is strictly required: image_url. That single required field is worth dwelling on, because it is also the first frame of the output — the quality of your portrait is the ceiling on the quality of your video.
Input Contract: image_url, Script, Voice, and Audio
The parameter surface is small enough to hold in your head, but there is one trap worth internalizing: audio_url silently disables an entire field group.
The required first frame
image_url is the only required parameter. It must be an HTTPS URL pointing to a portrait of the person who speaks, in jpg, jpeg, png, or webp. The image is used as the first frame, so framing, lighting, and facial clarity all propagate into the output. A tightly cropped, well-lit head-and-shoulders portrait behaves far better than a wide shot where the face occupies a small fraction of the frame.
Path A: built-in TTS
When audio_url is absent, you must supply script — the exact words the avatar speaks, up to 5000 characters, written in the language selected by voice_language. The spoken length of the script determines the video length, up to 3 minutes.
The TTS field group is:
voice: one of 30 named voices, each with a gender label. Default isZephyr (Female).voice_language: one of English (US), English (UK), Spanish, French, German, Italian, Portuguese (Brazil), Japanese, Korean, or Hindi. Default is English (US).voice_prompt: delivery instructions such as tone, pacing, accent, or emotion, up to 1000 characters. Default isSay the following.These instructions are not spoken aloud.
Path B: your own audio
When audio_url is present, it must be an HTTPS URL of speech audio up to 3 minutes — and up to 125 seconds at 4K. The video matches the audio length. In this mode, script, voice, voice_language, and voice_prompt are all ignored. Not rejected, ignored. If you send them anyway, nothing breaks, but nothing they say matters.
The prompt
prompt defaults to The person is talking. and accepts up to 2000 characters. Use it to describe how the person looks, moves, and behaves while speaking — not what they say. The script or audio carries the content; the prompt carries the performance and scene.
Resolution and seed
resolution accepts 480p, 768p, 1080p, 2k, or 4k, defaulting to 768p. Higher tiers cost more. seed is an integer from 0 to 2147483647 for reproducible results.
Use Case 1: Talking-Head Explainer and Onboarding Videos
The most immediate fit is the internal explainer: a single presenter portrait, a script, and a clean render that walks a new user through a product or a process. This is the canonical avatar-video path, and it is almost entirely script-driven.
A typical request sets image_url to your presenter or spokesperson portrait, script to the narration text, voice to a consistent voice across the whole series, and voice_prompt to something like "warm, conversational, moderate pace" so the delivery does not drift between episodes. Resolution can start at 768p for internal review and move to 1080p for anything customer-facing.
Two implementation notes matter here. First, keep the script within the language you selected in voice_language — the docs are explicit that the script is written in the selected language, and Chinese is not among the supported options. Second, treat the script as the timing source: the spoken length sets the video length, so a long script produces a long video and there is no separate duration knob. If you need a specific runtime, edit the script, not the parameters.
Because the output is deterministic given a fixed seed, you can regenerate the same performance after a small script edit and diff the two versions in review. That makes onboarding content, which tends to be revised often, much cheaper to maintain than a live-action shoot.
Use Case 2: Localized Training and Support Content
The second high-value pattern follows directly from voice_language. One portrait, one script translated per locale, and a separate render per language gives you a consistent presenter across an entire training library without hiring voice talent in each market.
The implementation is straightforward: hold image_url, voice, and prompt constant, and vary voice_language together with the translated script. Supported languages are English (US), English (UK), Spanish, French, German, Italian, Portuguese (Brazil), Japanese, Korean, and Hindi. Note the absence of Chinese — if your roadmap includes Chinese-language support content, this route is not the path for it, and you should plan a different pipeline rather than discovering that in production.
A few practical details. Voice names carry gender labels, so pick a voice per locale that matches the presenter you are presenting, and keep that mapping in configuration rather than in code. voice_prompt should be localized too — delivery instructions for a Japanese render probably should not be written as English tone descriptors, because they shape pacing and emotion rather than content.
Be deliberate about resolution across a localization batch. If you are producing ten language variants of the same module, render every one of them at 768p for linguistic review, then re-render only the approved cuts at the delivery tier. The per-second billing model makes this the difference between a manageable batch and an expensive one.
Use Case 3: Bringing Your Own Recorded Narration with audio_url
Sometimes the voice already exists. A founder recorded the narration, a customer supplied a testimonial, an accessibility team produced a clean read of a document. In those cases you switch to the audio-to-video path by supplying audio_url and omitting the TTS fields.
The contract is simple: audio_url must be an HTTPS URL of speech audio, up to 3 minutes, and the video matches the audio length. Everything in the TTS group — script, voice, voice_language, voice_prompt — is ignored. Your image_url portrait still supplies the first frame and the face, and prompt still describes how the person looks and behaves while speaking.
Two limits deserve attention in your pipeline design. First, the length cap: at 4K the practical ceiling drops to about 125 seconds, so a script that works at 768p may need to be split before you render it at the highest tier. Second, the audio is the timing authority, which means you cannot fix a rushed delivery with a parameter. If the recording is wrong, re-record; the model will faithfully match what it hears.
In practice this path works well for testimonials and recorded interviews where authenticity of voice matters more than consistency of studio sound. Because the TTS fields are ignored rather than validated, keep your request builder honest: if audio_url is set, strip the TTS fields before sending so nobody later assumes voice_prompt had an effect. A small helper that branches on the presence of audio_url prevents an entire class of confusing bug reports.
Use Case 4: Lip-Sync for Existing Brand or Presenter Footage
Lip-sync is where the portrait becomes a brand asset rather than a stock face. You have a presenter, a spokesperson, or an established character, and you want that specific person delivering new lines without a new shoot. The route's lip-sync capability handles this by aligning facial behavior to the speech track you provide.
The inputs are the same contract as the audio-to-video path: a portrait in image_url, speech via audio_url or via script with the built-in TTS, and a prompt describing movement and behavior. What distinguishes the lip-sync use case is how much weight the prompt carries. When you need a presenter to look natural — subtle head movement, appropriate eye contact, a specific energy level — the prompt is your only lever, and it is worth writing carefully rather than accepting the default.
The default The person is talking. is a reasonable baseline, but for brand footage you typically want something more specific about posture, framing, and demeanor. Keep it descriptive of observable behavior, not of internal states, and stay within the 2000-character limit. Remember that the prompt does not change what is said — that comes from the script or the audio — so never put dialogue in it.
For consistency across a campaign, pin the seed once you find a performance you like, then vary only the script or audio between takes. This gives you a repeatable presenter rather than a slightly different person in each asset. And keep the portrait stable: swapping image_url between renders will change the face, which defeats the purpose of lip-syncing an established presenter.
Use Case 5: High-Fidelity Output for Campaign and Hero Assets
The top of the resolution ladder exists for a reason: hero placements, campaign films, and anything that will be viewed large. The route offers 2k and 4k tiers above the default 768p, and for final marketing renders those are the appropriate choices.
The 4K audio cap
The single most important constraint at this tier is the audio length limit. Where the general cap is 3 minutes, at 4K the practical ceiling is about 125 seconds. That is a real pipeline constraint, not a footnote: a two-and-a-half-minute script that renders cleanly at 1080p will need to be shortened or split before a 4K render. Decide the runtime before you decide the tier, or you will discover the cap at the worst possible moment.
Cost scales with tier
Billing is per second of output, and the per-second rate scales with the resolution tier. The 480P tier is the cheapest per second, with 768P, 1080P, 2K, and 4K stepping upward in that order. This makes resolution the primary cost lever in the entire model — far more consequential than prompt length or seed choice. For a hero asset you render once, the higher tiers are easy to justify. For anything you render repeatedly, the tier should be a deliberate decision recorded somewhere, not a default left at whatever the last experiment used.
Because the output length follows the audio or script, cost is also driven by runtime. A tight 30-second hero cut at 4K is a fundamentally different budget object than a three-minute one. Write short, render high.
Cost Control, Seeds, and Production Checklist
The economics of this model are unusually legible, which is a gift if you build the right workflow around them.
Resolution is the main lever
Billing is per second of output, with the per-second rate rising across the 480P, 768P, 1080P, 2K, and 4K tiers. Two variables therefore drive spend: how long the video is, and which tier you render at. You control the first through script and audio length, and the second through a single enum value. Nothing else in the parameter surface moves cost.
The practical consequence is a two-stage render discipline. Draft at 480p or 768p while you are iterating on script, voice, prompt, and portrait. Only when the cut is approved do you re-render at the delivery tier. Iterating at 4K is the single most reliable way to waste budget on this model.
Seeds make iteration cheap
seed accepts an integer from 0 to 2147483647. Pin it during drafting so that each revision changes exactly one thing — the script, or the prompt, or the portrait — and you can attribute the difference to that change. Random seeds during exploration are fine, but the moment you are comparing variants, fix the seed.
Prompt practice
Keep prompt about appearance, movement, and behavior, under 2000 characters. Never put dialogue in it. Localize voice_prompt alongside the script when you are producing multi-language variants.
Pre-launch checklist
image_urlis HTTPS, jpg/jpeg/png/webp, well-framed head-and-shoulders portrait.- Either
audio_urlis set, orscriptis present and matchesvoice_language. - If
audio_urlis set, TTS fields are stripped from the request builder. - Runtime is within 3 minutes, and within about 125 seconds if targeting 4K.
resolutionis an explicit, reviewed value, not a leftover default.seedis pinned for reproducibility.- Final render happens at the delivery tier only after draft approval.
You can review the full parameter surface and capability list on the P-Video 2 Pro Avatar model page before wiring it into your pipeline.
Похожие статьи
Все статьи →-
Tutorial
gpt-6.2-sol in Practice: 5 High-Value Uses of a Text Model in Business
-
Tutorial
gpt-6.2-astra Practical Guide: Integration and Implementation Key Points for 5 High-Value Text Scenarios
A Developer's Checklist from Scenario Selection to Engineering Implementation
-
Tutorial
Tripo H3.1 Practical Application Scenarios: 5 High-Value Use Cases and Implementation Essentials
From text-to-3D to multiview reconstruction: choosing the right mode and parameters by business scenario